In short
Dual sourcing means qualifying a second supplier for critical parts so a single failure cannot stop your line or project. It pays for itself when downtime is expensive. Qualify the second source fully, give it regular volume, and make sure it does not share hidden dependencies with the first.
Dual sourcing means buying the same part or material from two qualified suppliers instead of one. For many industrial buyers, the single supplier that has delivered reliably for years feels like an asset – until a fire, the loss of a key employee, a capacity squeeze or a financial problem stops deliveries overnight. A dual sourcing strategy reduces that exposure, but it has costs of its own. The real question is not whether dual sourcing is good in general, but for which parts it pays off.
Single source vs sole source
Two terms are often confused:
- Sole source: only one supplier in the market can provide the item, for example because of a patent, a unique process or a specific approval.
- Single source: several suppliers could provide it, but you have chosen to use only one.
Sole source risk is structural and needs a different response, such as redesign, safety stock or long-term agreements. Single sourcing is a decision – and decisions can be revisited.
The risks of single sourcing
Concentrating volume with one supplier has real advantages: better prices, simpler communication, one set of tooling and one quality system to manage. The risks tend to stay invisible until they materialise:
- Supply interruption from fire, flood, machine breakdown, strikes or insolvency.
- Capacity conflicts when a larger customer takes priority in the supplier's schedule.
- A weak negotiating position on price and lead time, especially when the supplier knows you have no alternative.
- Quality drift, with no benchmark to compare against.
- Concentration of geographic, regulatory or logistics risk in one region or on one transport route.
When a second qualified supplier pays for itself
A second source adds cost: qualification effort, possibly a second set of tooling, patterns or fixtures, more supplier management, and usually less favourable pricing on split volumes. It tends to pay for itself when several of the following are true:
- The part is critical to your production or to a customer delivery, and stopping would cost far more than the part itself.
- Replacement lead time is long, for example when tooling, patterns or qualification would take months to repeat with a new supplier.
- Annual volume is large enough to give both suppliers a meaningful share.
- The current supplier has shown capacity, delivery or financial warning signs.
- Market prices are volatile and a second quote keeps pricing transparent.
A simple test: estimate what one month of supply interruption would cost you – lost sales, contractual penalties, expediting, idle labour – and compare it with the annual cost of maintaining a second source. If the interruption cost is clearly larger and the event is not improbable, the second source is a form of insurance worth buying.
How to qualify a second supplier
A second source only reduces risk if it is genuinely qualified. A supplier that has never produced the part is a name on a list, not a backup. Qualification normally follows the same path as for the first supplier:
- Assess capability: certificates, equipment, capacity and experience with similar parts.
- Audit the factory, including the welding, machining or casting processes relevant to the part.
- Share the full technical package: drawings, specifications, inspection requirements and the approved reference sample.
- Produce and approve a golden sample or first article against the same criteria as the first supplier.
- Run a pilot order and inspect it as you would a series order.
- Release for series production under the same inspection plan as the primary supplier.
Check that the second source is truly independent. Two suppliers that buy castings from the same foundry, or use the same galvaniser, share a single point of failure further down the chain. Geographic diversity can also matter if the main risk is regional, such as logistics disruption.
How to split volume between suppliers
There is no universal split. Common approaches include:
- 70/30 or 80/20: the primary supplier keeps the majority and the scale benefits; the secondary receives enough volume to stay active and familiar with the part.
- 50/50: suitable when both suppliers are comparable, volume is high and price competition matters.
- Split by variant or region: each supplier takes certain part numbers or supplies different plants, while being qualified on the other's parts as backup.
Whatever the split, the secondary supplier needs regular orders. A supplier that receives one order a year will not keep tooling ready, people trained or processes stable. Be open with both suppliers about the strategy; professional manufacturers generally respond better to clear volume commitments than to unexplained swings in orders.
Managing two suppliers without doubling the work
Dual sourcing does increase management effort, but it can be contained. Use one technical package with strict drawing revision control for both suppliers, the same inspection checklist and acceptance criteria, and a single scorecard comparing delivery, quality and responsiveness. Performance data from two sources also gives you a benchmark that a single supplier can never provide.
How ISY Supply supports dual sourcing
ISY Supply can identify and qualify manufacturers in Türkiye as a second source for parts currently made elsewhere, or add a second Turkish source alongside an existing one. The same drawings, sample approval and inspection plan are used, so that both sources are measured on the same basis.
Frequently Asked Questions
What is the difference between dual sourcing and multi-sourcing?
Dual sourcing uses two qualified suppliers for the same item; multi-sourcing uses more than two. Dual sourcing is a common balance between resilience and management effort.
Does dual sourcing increase costs?
Usually somewhat, through qualification, tooling and smaller volumes per supplier. For critical parts, that cost is often lower than the expected cost of a supply interruption.
How should volume be split between two suppliers?
Common splits are 70/30 or 80/20 to keep scale with the primary supplier, or 50/50 when the suppliers are comparable. The secondary supplier needs enough regular volume to stay ready.
What is the difference between single source and sole source?
A sole source is the only supplier able to provide an item. A single source is one supplier chosen from several possible ones, which means the risk can be reduced by qualifying another.




