In short

ISO 9001 certifies a quality management system, not welding capability. For welded products, ask for ISO 3834 at the right level, EN 1090 with the required execution class (EXC) for structural steel, EN ISO 9606 welder qualifications and approved WPS/WPQR, and check each certificate's scope and validity.

"We are ISO 9001 certified" is often the first line in a supplier presentation. For a buyer of welded components, it is a reasonable start but not an answer. ISO 9001 vs ISO 3834 is not a choice between two equivalent certificates: ISO 9001 shows that a company runs a documented quality management system, while ISO 3834 addresses the quality requirements of fusion welding itself. If your parts are welded, you need to understand both – and, for structural steel or pressure equipment, a few more standards as well.

What ISO 9001 certifies – and what it does not

ISO 9001 is a generic quality management standard that applies to any organisation, from a software company to a foundry. Certification means an accredited body has audited the company and found processes for customer requirements, document control, purchasing, nonconformities, corrective action and management review.

It does not set technical requirements for any product. It does not say how welds must be made, which welders are qualified or what testing is needed. A workshop can hold a valid ISO 9001 certificate and still produce welds with lack of fusion, porosity or undercut, because the standard does not assess welding competence.

ISO 3834: quality requirements for fusion welding

EN ISO 3834 is the welding-specific quality standard. It defines what a manufacturer must have in place to control welding: review of requirements, technical review, subcontracting, welding personnel, inspection and testing personnel, equipment, welding procedures, consumables, post-weld heat treatment, inspection and testing, nonconformity handling, calibration, identification and traceability, and quality records.

It comes in levels, so the requirement can be matched to the risk of the product:

  • ISO 3834-2: comprehensive quality requirements, typically for critical structures and pressure equipment.
  • ISO 3834-3: standard quality requirements.
  • ISO 3834-4: elementary quality requirements.

Part 1 explains how to select the appropriate level, Part 5 lists the documents a manufacturer must conform to in order to claim compliance, and Part 6 gives implementation guidance. A central element is welding coordination: tasks and responsibilities described in ISO 14731 must be assigned to personnel with appropriate technical knowledge.

EN 1090 and CE marking for structural steel

For fabricated structural steel and aluminium components placed on the EU market, EN 1090 is central. EN 1090-1 sets out the conformity assessment for structural components, including factory production control (FPC) certified by a notified body, and is the basis for CE marking under the EU Construction Products Regulation. EN 1090-2 contains the technical requirements for execution of steel structures, and EN 1090-3 for aluminium.

EN 1090-2 uses execution classes, EXC1 to EXC4, with requirements increasing by class. The welding quality requirement links directly to ISO 3834:

Execution classTypical use (indicative)Welding quality requirement in EN 1090-2
EXC1Simple structures with low consequences of failureISO 3834-4 (elementary)
EXC2Most buildings and general structural steelworkISO 3834-3 (standard)
EXC3Structures with higher consequences of failureISO 3834-2 (comprehensive)
EXC4Structures with very high consequences of failureISO 3834-2 (comprehensive)

The execution class is specified by the designer, not chosen by the fabricator. Check that the supplier's EN 1090 certificate covers the class your project requires: a certificate limited to EXC2 does not cover EXC3 work.

Welder qualification: EN ISO 9606

Procedures do not weld; people do. EN ISO 9606-1 covers qualification testing of welders for fusion welding of steels, with other parts covering aluminium, copper, nickel and other materials. A welder certificate states the process, product form (plate or pipe), joint type, material group, filler material, thickness and diameter range, and the welding positions for which the welder is qualified.

Qualifications must be confirmed at regular intervals (every six months by the welding coordinator or examiner) and revalidated according to the route chosen under the standard. Ask for the certificates of the welders who will actually weld your parts, and check that the ranges cover your material, thickness and positions. Operators of fully mechanised and automatic welding equipment are qualified to ISO 14732.

WPS and WPQR: qualified welding procedures

A Welding Procedure Specification (WPS) – for arc welding, in the format of ISO 15609-1 – is the instruction for making a particular weld: process, parent and filler materials, joint preparation, positions, preheat and interpass temperatures, current, voltage, travel speed and heat input.

A WPS must be qualified. The most rigorous route is a welding procedure test recorded in a Welding Procedure Qualification Record (WPQR) according to ISO 15614-1 for arc welding of steels: a test piece is welded, then examined with non-destructive and destructive tests, usually witnessed by an examiner or examining body. Other routes exist in the ISO 15610 to ISO 15613 series, but their use is restricted by the application standard.

When reviewing a supplier, check that each WPS references a valid WPQR, and that the WPQR ranges – material group, thickness, process, position and, where impact properties matter, heat input – cover the actual work.

A note on pressure equipment

For pressure equipment placed on the EU market under the Pressure Equipment Directive 2014/68/EU, permanent joining procedures and personnel for equipment in categories II, III and IV must be approved by a competent third party: a notified body or a recognised third-party organisation. Harmonised standards such as EN 13445 for unfired pressure vessels then set detailed design, manufacturing and inspection requirements. An ISO 9001 certificate does not replace any of this.

What to ask a welding supplier

  1. ISO 3834 certificate, with the part (2, 3 or 4), scope and issuing body.
  2. EN 1090-1 FPC certificate with the execution class covered, if structural components need CE marking.
  3. Name and qualification of the responsible welding coordinator.
  4. Welder qualification certificates to EN ISO 9606-1 for the welders assigned to your job.
  5. A WPS for each joint type, with the supporting WPQR.
  6. NDT personnel qualifications (ISO 9712) and procedures for the methods you require.
  7. ISO 9001 certificate, as evidence of the overall management system.

How ISY Supply checks welding capability

When ISY Supply evaluates a fabrication supplier in Türkiye, welding documentation is reviewed against the client's specification – certificates and scopes, WPS and WPQR coverage, welder qualifications – and compared with what is seen on the shop floor during the factory visit.

Frequently Asked Questions

Is ISO 9001 enough for a welding supplier?

Not where weld quality matters. ISO 9001 covers the management system; ISO 3834 covers welding quality requirements. For CE-marked structural steel, EN 1090-1 certification is also required.

Which ISO 3834 level does EN 1090 EXC2 require?

EN 1090-2 requires ISO 3834-3 (standard) for EXC2, ISO 3834-2 (comprehensive) for EXC3 and EXC4, and ISO 3834-4 (elementary) for EXC1.

What is the difference between a WPS and a WPQR?

A WPS is the instruction for how to make a weld. A WPQR is the record proving that the procedure has been qualified, usually by welding and testing a test piece.

What does EN ISO 9606-1 certify?

The qualification of an individual welder for fusion welding of steels, within defined ranges of process, material, thickness, joint type and welding position.

#iso 3834#iso 9001#en 1090#welding#wps